Worksite Web TCP port used on a DMZ conf.

Need a info.

Can anybody tell me what TCP port are used in a DMZ configuration.
When we have Worksite Web installed on a DMZ area of our firewall, what are the TCP ports needed to be open for this configuration to work?

Schema:
Remote Client -> INTERNET -> Worksite Web -> DMZ -> Worksite Server

Remote Client only “speaks” with the Worksite Web thru port 80?
Remote Client need to connect to the middle tear server, thru port 1080 and 1081, or that connection is only performed by Worksite Web?

Thanks for your help

Find more posts tagged with

Comments

dabird

Communication between WorkSite Web and your remote clients is channeled through ports 80 or 443 (SSL) by default.

If WorkSite Web is in your DMZ and your WorkSite Server is behind the firewall, then you will need to open ports 1080 and 1081 on the firewall. This will allow iManage.dll on the WorkSite Web server in your DMZ to communicate with the WorkSite server on your internal network.

Migrateduser

Communication between WorkSite Web and your remote clients is channeled through ports 80 or 443 (SSL) by default.

If WorkSite Web is in your DMZ and your WorkSite Server is behind the firewall, then you will need to open ports 1080 and 1081 on the firewall. This will allow iManage.dll on the WorkSite Web server in your DMZ to communicate with the WorkSite server on your internal network.

Thanks dabird,

The only document I've found in Worksite Support (Article #61999-95), was about iManage Internet Java Applet (2002) and all communication were made between the Worksite Server and Client Browser