Unable to publish using PLC

I have installed Live Site display runtime services on "D" drive and my teamsite is on E drive.
while publishing to production using the PLC workflow, it is trying to publish in on E:\interwoven\livesitedisplayservices\runtime\web instead of

\interwoven\livesitedisplayservices\runtime\web.

Which configuration should I need change to point to the D drive?

Thank you in advance.

Find more posts tagged with

Comments

Migrateduser

check opendeploy.properties file the value "opendeploy.runtimeHome"

pagesAndTOC2.rptdesign

kaleemS

Hi,
I had changed value of opendeploy.runtimeHome to

drive of the file opendeploy.properties which is at teamsite server location
E:\Interwoven\TeamSite\local\config\lib\content_center\livesite_customer_src\etc\conf\livesite_customer but it doen't make any difference.
PLC still publishing at e: drive.

Is there any other option to change this?

Migrateduser

Did you rebuild livesite customer toolkit after?

kaleemS

Yes, I did.
Also I restart the OD base and OD rec.

nipper

You have to start doing some debug yourself first.

Start with the OpenDeploy logs, see which ones get updated on the sender and receiver. Post some of the errors and then someone can help.

With the limited information you have provided, it will be pure luck if anyone can pinpoint the issue.

kaleemS

I already debugged and found only one error in the OD logs ,
Here is the error.

LIB: id=m4 2012-02-02 09:04:24 FailedCommit 0.
LIB: id=m4 2012-02-02 09:04:24 Destination directory [E:\interwoven\livesitedisplayservices\runtime\web]
LIB: 2012-02-02 09:04:24 ERROR: E:\interwoven\livesitedisplayservices\runtime\web could not be createdLIB: 2012-02-02 09:04:24 ERROR: E:\interwoven\livesitedisplayservices\runtime\web could not be created.
LIB: 2012-02-02 09:04:24 ERROR: Failed deploying filelist[0]
LIB: 2012-02-02 09:04:24 ERROR: Failed 1 of 2 filelists
ENG: Thread-53 After COMPARE res=-1

The error occurred because there is no E drive on destination server and base server is trying to push the content only on E drive , instead of D drive.

nipper

and you ran both of these commands in DOS (as administrator):

cd E:\Interwoven\TeamSite\local\config\lib\content_center\livesite_customer_src

.\build.bat

Faizi

You should check following points:

User has permission on \interwoven\livesitedisplayservices\runtime\web
This path is available in odbase allowed directories
LiveSite build has been successfully executed
Check opendeploy.properties file at iw-home/httpd/webapps/content_center/WEB-INF/conf/livesite_customer

If above points are correct then deployment should work as required.