nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

error while trying to generate using TS 7.3.2

Nissan

We are newly migrating to TS 7.3.2 windows from TS 6.7.2 Unix

I was trying to get a dct and tpl to work on the new TS Dev box.

While trying to generate from DCT, i see this error on screen:

An error occurred during PT compiling. Please see more details in log files.

Logs (content_center.log):

2013-03-25 17:42:08,826 [http-0.0.0.0-8080-54] ERROR com.interwoven.ui.base.impl.command.CommandHandler () - forward

"WIZARD" not handled by descriptor iw.ccpro.launch_edit_form
2013-03-25 17:42:16,831 [http-0.0.0.0-8080-54] WARN com.interwoven.ui.datacapture.core.dcxp.DTDNodeOrderingStrategy () -

Error reading DTD dcr4.5.dtd. Message: no protocol: dcr4.5.dtd
2013-03-25 17:42:17,099 [http-0.0.0.0-8080-54] ERROR com.interwoven.ui.formspub.datacapture.CreateImageAssociation () -

createImageAssociation: couldn't find a workarea relative vpath in DCR

//ESAPPT135/aacom/main/NorthAmerica/WORKAREA/production/templatedata/non-Repository/standardLayout/data/en_US/test_03252013

returning empty CSAssociation[]
2013-03-25 17:42:17,099 [http-0.0.0.0-8080-54] ERROR com.interwoven.ui.formspub.datacapture.CreateImageAssociation () -

createImageAssociation: couldn't find a workarea relative vpath in DCR

//ESAPPT135/aacom/main/NorthAmerica/WORKAREA/production/templatedata/non-Repository/standardLayout/data/en_US/test_03252013

returning empty CSAssociation[]
2013-03-25 17:42:17,099 [http-0.0.0.0-8080-54] ERROR com.interwoven.ui.formspub.datacapture.CreateImageAssociation () -

createImageAssociation: couldn't find a workarea relative vpath in DCR

//ESAPPT135/aacom/main/NorthAmerica/WORKAREA/production/templatedata/non-Repository/standardLayout/data/en_US/test_03252013

returning empty CSAssociation[]
2013-03-25 17:42:17,099 [http-0.0.0.0-8080-54] ERROR com.interwoven.ui.formspub.datacapture.CreateImageAssociation () -

createImageAssociation: couldn't find a workarea relative vpath in DCR

//ESAPPT135/aacom/main/NorthAmerica/WORKAREA/production/templatedata/non-Repository/standardLayout/data/en_US/test_03252013

returning empty CSAssociation[]
2013-03-25 17:42:17,099 [http-0.0.0.0-8080-54] ERROR com.interwoven.ui.formspub.datacapture.CreateImageAssociation () -

createImageAssociation: couldn't find a workarea relative vpath in DCR

//ESAPPT135/aacom/main/NorthAmerica/WORKAREA/production/templatedata/non-Repository/standardLayout/data/en_US/test_03252013

returning empty CSAssociation[]
2013-03-25 17:42:17,099 [http-0.0.0.0-8080-54] ERROR com.interwoven.ui.formspub.datacapture.CreateImageAssociation () -

createImageAssociation: couldn't find a workarea relative vpath in DCR

//ESAPPT135/aacom/main/NorthAmerica/WORKAREA/production/templatedata/non-Repository/standardLayout/data/en_US/test_03252013

returning empty CSAssociation[]
2013-03-25 17:42:17,099 [http-0.0.0.0-8080-54] ERROR com.interwoven.ui.formspub.datacapture.CreateImageAssociation () -

createImageAssociation: couldn't find a workarea relative vpath in DCR

//ESAPPT135/aacom/main/NorthAmerica/WORKAREA/production/templatedata/non-Repository/standardLayout/data/en_US/test_03252013

returning empty CSAssociation[]
2013-03-25 17:42:51,380 [http-0.0.0.0-8080-54] ERROR com.interwoven.ui.formspub.utils.PerlPTCompiler () - UtildClient

executing command error. Return Code: 6
2013-03-25 17:42:51,380 [http-0.0.0.0-8080-54] ERROR com.interwoven.ui.base.impl.command.CommandHandler () - forward

"error" not handled by descriptor iw.formspub.do_generate

Any help is appreciated!

Regards!

Find more posts tagged with

Comments

Adam Stoller

We are newly migrating to TS 7.3.2 windows from TS 6.7.2 Unix

I was trying to get a dct and tpl to work on the new TS Dev box.

While trying to generate from DCT, i see this error on screen:

An error occurred during PT compiling. Please see more details in log files.

Nissan

Ghoti,

Appreciate your response!

Below are the answers to your questions:

•What do you mean by migrating? -- I meant we are moving to new TS box
◦Are you doing copies from the staging area?
◦Something else?
•Is the DCT new or pre-existing from the 6.7.2 system? -- it is a pre-existing one from 6.7.2
◦Does it reference any inline, callout, or callserver scripts? -- it references to 2 inline command but once i commented that the DCT is showing up with all the other fields.
◦If so, have you verified that all of them work in the new environment? -- For now we need a working DCT and tpl for testing purpose. But eventually we need to make the inline command work. Any advise on that would be helpful but the main thing right now is to get a DCT and tpl working.
•Does your PT reference any custom Perl modules? -- yes it does
•Have you tried running iwpt_compile.ipl with the -ocode flag to try to debug it further? -- how do i do that ?

Nissan

Ghoti,

When i ran the iwpt_compile.ipl , this is what i see:

\Interwoven\TeamSite\bin>iwpt_compile.ipl -ocode \aacom\main\NorthAmerica\WORK
AREA\production\templatedata\non-Repository\standardLayout\presentation\standard
Layout.tpl

No presentation template file

Any help is appreciated!

nipper

use forward slashes, not back slash

ALso you are missing some parameters, check the iwpt_compile invocation

Nissan

Tried that too but same result.

Tried with arguments and the result is as below:

\Interwoven\TeamSite\bin>iwpt_compile.ipl -pt \aacom\main\NorthAmerica\WORKARE
A\production\templatedata\non-Repository\standardLayout\presentation\standardLay
out.tpl -ofile \aacom\main\NorthAmerica\WORKAREA\production\pubcontent\en_US\tes
t_03252013.jsp -iw_pt-dcr \aacom\main\NorthAmerica\WORKAREA\production\templated
ata\non-Repository\standardLayout\data\en_US\test_03252013 -iw_pt-arg varLocale=
en_US

Could not open presentation template: \aacom\main\NorthAmerica\WORKAREA\producti
on\templatedata\non-Repository\standardLayout\presentation\standardLayout.tpl

Any help pls!

nipper

I have not used iwpt_compile on DOS for a while, but you may need to specify the drive letter ( Y: )





\Interwoven\TeamSite\bin>iwpt_compile.ipl -pt Y:\aacom\main\NorthAmerica\WORKAREA\production\templatedata\non-Repository\standardLayout\presentation\standardLay out.tpl -ofile Y:\aacom\main\NorthAmerica\WORKAREA\production\pubcontent\en_US\tes
t_03252013.jsp -iw_pt-dcr Y:\aacom\main\NorthAmerica\WORKAREA\production\templatedata\non-Repository\standardLayout\data\en_US\test_03252013 -iw_pt-arg varLocale=en_US

Adam Stoller

Try using Y: and forward slashes (/ not \) for the paths
If you don't know how to fix your inline, callout, and callserver scripts and custom perl modlues to run on Windows instead of Unix - you should probably read some books and/or hire someone (contract?) who already understands how to do that.

Those are probably only the tip of the iceberg regarding customization porting that you need to take care of.

Nissan

This is what i got after using Y: and / :

nipper

It means you did not use Y: in all the paths, DCR and ofile as well

Nissan

Oh Thanks ! Still no luck...

\Interwoven\TeamSite\bin>iwpt_compile.ipl -pt Y:/aacom/main/NorthAmerica/WORKA
REA/production/templatedata/non-Repository/standardLayout/presentation/standardL
ayout.tpl -ofile Y:/aacom/main/NorthAmerica/WORKAREA/production/pubcontent/en_US
/sl_0327.jsp -iw_pt-dcr Y:/aacom/main/NorthAmerica/WORKAREA/production/templated
ata/non-Repository/standardLayout/data/en_US/sl_0327 -iw_pt-arg varLocale=en_US
Unrecognized escape \I passed through at (eval 36) line 63.
Unrecognized escape \T passed through at (eval 36) line 63.
Unrecognized escape \i passed through at (eval 36) line 63.
Unrecognized escape \A passed through at (eval 36) line 63.

Could not process template: Y:/aacom/main/NorthAmerica/WORKAREA/production/templ
atedata/non-Repository/standardLayout/presentation/standardLayout.tpl

Try debugging like this: iwpt_compile ... -ocode ****.ipl; ****.ipl

\Interwoven\TeamSite\bin>

Migrateduser

It would appear that the issue is in your standardLayout.tpl file. Look at the line that the error is complaining about and fix the escapes. If you can upload the tpl file so that we can see it we may be able to find the issue.

Nissan

Attached is the standardLayout.tpl

Let me know if you see any issue with line 63.

nipper

Not very helpful

Try adding this to the end of the command: -ocode ****.ipl

It will create a Perl script called ****.ipl

Then you can look at that and see if you can identify the problem. You can also execute it and may see a better error.

The other thing you may do is put some print statements in the Perl code to identify where the error is, and use that information to debug.

Migrateduser

You need to have two backslashes in the following lines (ignore the extra space that this forum is putting below).

[PHP]
require "D:\Interwoven\TeamSite\aascripts\includes\AATemplating.pm";
use lib 'D:\Interwoven\TeamSite\aascripts\lib\perl';
[/PHP]

[PHP]
require "D:\\Interwoven\\TeamSite\\aascripts\\includes\\AATemplating.pm";
use lib 'D:\\Interwoven\\TeamSite\\aascripts\\lib\\perl';
[/PHP]

I think there are some other lines with d:\. Search the remainder of your code to find them.

Also, you should put your custom modules into the following location.

d:\Interwoven\TeamSite\iw-perl\site\lib

Then, add the following to the first line of your AATemplating.pm file.

package AAScripts::AATemplating;

In the above location, create a folder called AAScripts and put your AATemplating.pm into that folder.

Then call it using.

use AAScripts::AATemplating;
my $obj = new AAScripts::AATemplating
$obj->yourfunction("somevalue");

Adam Stoller

You need to have two backslashes in the following lines (ignore the extra space that this forum is putting below).

[PHP]
require "D:\Interwoven\TeamSite\aascripts\includes\AATemplating.pm";
use lib 'D:\Interwoven\TeamSite\aascripts\lib\perl';
[/PHP]
[PHP]
require "D:\\Interwoven\\TeamSite\\aascripts\\includes\\AATemplating.pm";
use lib 'D:\\Interwoven\\TeamSite\\aascripts\\lib\\perl';
[/PHP]

The second line in the first set is syntactically correct but syntactically incorrect in the second set - because it uses single-quotes.

Better would be to re-order the two lines, insert a third one (because for some reason you're using 'includes' ?) and always use forward slashes:

use lib "d:/Interwoven/TeamSite/aascripts/lib/perl";
use lib "d:/Interwoven/TeamSite/asscripts/includes";
use AATemplating;

Even better ...

[...] you should put your custom modules into the following location.

d:\Interwoven\TeamSite\iw-perl\site\lib

Then, add the following to the first line of your AATemplating.pm file.

package AAScripts::AATemplating;

This assumes the module was placed in .../iw-perl/site/lib/AAScripts/, otherwise the package name is just "AATemplating" and the references (below) would similarly just indicate AATemplating, without the AAScripts:: prefix.

In the above location, create a folder called AAScripts and put your AATemplating.pm into that folder.

Then call it using.

use AAScripts::AATemplating;
my $obj = new AAScripts::AATemplating
$obj->yourfunction("somevalue");

(the last two lines are assuming that AATemplating.pm is written in an object-oriented fashion - that's a major assumption, which based upon all the issues being encountered, I would sincerely doubt is the case.