nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

DrillDown in Charts

sirim

Hello,

I have a chart with 3 series as bars and 1 as line. I need to have drill downfor all the bars and the line sepeartly. I mean all four of them will have different reports. Is that possible to do?
And report has 3 parameters too.

can someone please help me with this, i am stuck at this point since long..

Regards

Find more posts tagged with

Comments

mwilliams

When you go into the chart editor, your all your different series should be listed in the menu on the left. If you click on an individual series, there is an activity button where you can set up a drill through for each series. Hope this helps.

sirim

Thank you Michael!!

I kind of figured that out. THe issue I am actually facing is the using the multiselect parameter in the drill down. I use a multiselect parameter to select the projects name. I am unable to link it for the report and the subreport, it gives the following error
The trigger data is invalid or its type is unknown.

I tried to follow the steps you metioned in the link below it did not help me a lot
http://www.birt-exchange.org/org/forum/index.php/topic/21527-drill-through-hyperlink-with-multi-select-parameter/page__pid__73137__st__0&#entry73137__s__8d25e4e73ae2a7bcf1326dd233a8efc3

Do you ahve any idea what other steps should I perform. I can attach my desing in case you need it.

Thank you for all the time.

Regards

mwilliams

Yeah. Please attach your design(s), so I can see what you're doing, exactly!