nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

DNR at Target Server Failed

fyyap

I would like to run a batch job in target server after files deploy from Teamsite Server (Unix) to a target server (windows 2000). The file deployment is successful but the batch file not running.

My DNR Script:
-----------------------------------------------------------
<deployment transactional="no" >
<execDeploymentTask useDefinition="DefDRIB" >
<deployNRun>
<dnrDeployment location="target" when="after" triggerPoint="disconnect" state="always">
<script cmd="D:\Interwoven\OpenDeployNG\conf\examples\samples\sample_script.bat" as="" where="D:\Interwoven\O
penDeployNG\tmp" async="no" />
</dnrDeployment>
</deployNRun>
</execDeploymentTask>
</deployment>

Source Server
----------------------
Platform: Unix
OD version: Version 5.6.0.1.0 Build 21220 Interwoven 20030618

Target Server
----------------------
Platform: Windows 2000
OD version: Version 5.6.0.0.0 Build 15978 Interwoven 20030121

Please advise. Thanks a lot.

Find more posts tagged with

Comments

Adam Stoller

Have you tried applying SP1 to the target server?

--fish
Senior Consultant, Quotient Inc.
http://www.quotient-inc.com

Migrateduser

I don't think you can run a DNR on the target after disconnect.

Todd Scallan
Director of Product Management
Interwoven
t: 408-530-7167
e: tscallan@interwoven.com

Adam Stoller

Sigh - that was my first assumption too, and then I got thrown off by the example at the bottom of page 207 in the OpenDeploy Administration Guide - Release 5.6, but if I had looked a bit further in the OpenDeploy 5.6 SP1 Release Notes (page 60) - I would have seen the clarification for page 207 and stuck to my initial thinking:
(some emphasis added)

Page 207
The section "Selecting the Task-Level Deployment Stage" lists a series of pairings of the when and triggerPoint attribute values. No mention is made of whether each pairing is supported on the source side (location="source") or target side (location="target") of the deployment, implying that they are supported equally on both sides.
However, the following pairings are only supported on the source-side, not the target-side:

At the beginning of the task:
when="before" triggerPoint="connect"
At the beginning of the transfer of content:
when="before" triggerPoint="transfer"
At the end of the task:
when="after" triggerPoint="disconnect"

--fish
Senior Consultant, Quotient Inc.
http://www.quotient-inc.com

Migrateduser

Fyi, this info was updated/corrected in the Nov 2003 edition of the OD 5.6 Admin Guide.

Todd Scallan
Director of Product Management
Interwoven
t: 408-530-7167
e: tscallan@interwoven.com