Shutdown or Continue?

Hello,WHen I start Builder should I select Shutdown LIvelink services or COntinue??I've been selecting Continue...Thanks,Asha

Find more posts tagged with

Comments

Hans_Stoop_(hstoop_(Delete)_1579932)

Message from Hans Stoop <hstoop@opentext.com> via eLink

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">eLink

Shutdown must be chosen.

The builder replaces the service completely. Therefore the service must be shutdown.

hans

-----Original Message-----
From: eLink Discussion: Livelink Builder Discussion [mailto:componentbuilder@elinkkc.opentext.com]
Sent: vrijdag 5 maart 2004 5:51
To: eLink Recipient
Subject: Shutdown or Continue?

Shutdown or Continue? Posted by DeloitteAdmin on 03/04/2004 11:50 PM

Hello,

WHen I start Builder should I select Shutdown LIvelink services or COntinue??

I've been selecting Continue...

Thanks,
Asha

DeloitteAdmin_(Delete)_2707331

When would I select continue?

David_Barker_(americ02user3_-_(deleted))

Frankly, I've never found Contine to be very useful. This just allows you to watch the Livelink server. You may be able to track the threads, but I've never found a reason to do that yet.The only time it would probably be useful is to shadow your Production system without replacing it with the Single-threaded Builder. Debugging a Live Production instance is usually done through instrumentation in the Logs, etc. Unless the system is down-hard, in which case I would block the users with a Web message at the Front-door and then utilize a Back-door URL to inspect the system through the Builder. Otherwise, if the error is not critical I usually use my Dev system to model the error and determine what the problem is.Dave