OScript tutorial and livelink builder

Ankur Jain

Hi ,

Is there any tutorial for oscript learning available.

Kindly share the same.

Also where can we find setup for livelink builder.

Thanks,

Ankur

Find more posts tagged with

Comments

Louis_Aube

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">

Hi Ankur...

There some guidess installed in the builder directory in your installation when you install builder.

file:///D:/OpenText/builder/documentation/index.html

Regards...

______________________________________________________
Louis Aubé

Principal Technical Analyst
Phone: 519-888-7111 x2397
Email: laube@opentext.com

______________________________________________________
Customer Support Email: support@opentext.com
Customer Support Telephone: 800-540-7292
Customer Support Fax: 800-888-6663

From: eLink Entry: Content Server Builder Forum [mailto:componentbuilder@elinkkc.opentext.com]
Sent: Friday, November 16, 2012 7:42 AM
To: eLink Recipient
Subject: OScript tutorial and livelink builder

OScript tutorial and livelink builder

Posted by ankur-jain@hcl.com (Jain, Ankur) On 11-16-2012 07:37

Hi ,Is there any tutorial for oscript learning available.Kindly share the same.Also where can we find setup for livelink builder.Thanks,Ankur

[To post a comment, use the normal reply function]
Forum:	Content Server Builder Forum
Content Server:	Knowledge Center

Pramod_Mohandas

Hi Ankur,

Not exactly.

You will need to take up the various builder courses that are available to you via the OT academy for a price.

OScript is OT’s proprietary language & any kind of learning on this is available only from them.

Thanks & Regards

Pramod Mohandas

From: eLink Entry: Content Server Builder Forum [mailto:componentbuilder@elinkkc.opentext.com]
Sent: Friday, November 16, 2012 6:12 PM
To: eLink Recipient
Subject: OScript tutorial and livelink builder

OScript tutorial and livelink builder

Posted byankur-jain@hcl.com (Jain, Ankur) On 11-16-2012 07:37

Hi ,

Is there any tutorial for oscript learning available.

Kindly share the same.

Also where can we find setup for livelink builder.

Thanks,

Ankur

[To post a comment, use the normal reply function]
Forum:	Content Server Builder Forum
Content Server:	Knowledge Center

This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient(s), please reply to the sender and destroy all copies of the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email, and/or any action taken in reliance on the contents of this e-mail is strictly prohibited and may be unlawful.

Appu_Nair1

I do not want to instill fear for becoming a oscripter by self study.If you were going to self study you will need these things.In these days of VM technology it is almost a non brainer.

A pretty good representation of your production livelink same modules /patches etc.You probably don't need the complete EFS or search.
You need a database goes without saying because livelink will not run without it
The Builder program.

Then after doing your due diligence such as snapshotting etc to come back if you are in a point of no return,consider reading the builder tutorial of "address book".It may not compile in the new things but that is the fun you keep plugging at it so you see some output.If you spend close to 5 or 6 days in that you will come out more confident.I can give you an addressbook module that compiles in a 9.7.1 but that would spoil the whole fun of learning.

Pramod suggests attending classes.It is very good if you can do that but it does not need to be that way.There's nothing better if Howard Pell could teach you

The real trouble for first time learners is the 'Best Practices'.How do I approach something.Usually senior oscripter like Hans Stoop,Kyle Swidrowich,Chris Webster all chip in saying this is how you do it without actually providing you code and you learn to do it better and better as you gain experience.

In my opinion you should start at understanding the IDE,and then tracing how a livelink call gets to builder chain.That is very interesting stuff.

Plenty of solved and east to use oscript snippets are vailable in the oscript forum,builder forum.communities forum ,external places such as greggriffiths.com , livelink.in (my blog) , oscriptadventures.com and a whole lot of others.

If you have a impending work that you would like to get done please don't hack a solution consider approaching somebody for a solution or atleast ideas,your customer would be very happy that way

BTW CSS IDE is changing I have not worked in it so don't know too much about it

David Templeton

Yes everyone, the oclipse beta is now live!!!!! Sign up download the VM and give it a try.

Search for "oclipse" on the KC for the beta site

Regards
David

Sent from my blackberry at 20 thumbs a minute.

From: eLink Entry: Content Server Builder Forum [mailto:componentbuilder@elinkkc.opentext.com]
Sent: Friday, November 16, 2012 12:16 PM
To: eLink Recipient <devnull@elinkkc.opentext.com>
Subject: RE OScript tutorial and livelink builder 2

RE OScript tutorial and livelink builder 2

Posted by appu.n.nair@conocophillips.com (Nair, Appu) On 11-16-2012 12:14

I do not want to instill fear for becoming a oscripter by self study.If you were going to self study you will need these things.In these days of VM technology it is almost a non brainer.A pretty good representation of your production livelink same modules /patches etc.You probably don't need the complete EFS or search.You need a database goes without saying because livelink will not run without itThe Builder program.Then after doing your due diligence such as snapshotting etc to come back if you are in a point of no return,consider reading the builder tutorial of "address book".It may not compile in the new things but that is the fun you keep plugging at it so you see some output.If you spend close to 5 or 6 days in that you will come out more confident.I can give you an addressbook module that compiles in a 9.7.1 but that would spoil the whole fun of learning.Pramod suggests at! tending classes.It is very good if you can do that but it does not need to be that way.There's nothing better if Howard Pell could teach you :)The real trouble for first time learners is the 'Best Practices'.How do I approach something.Usually senior oscripter like Hans Stoop,Kyle Swidrowich,Chris Webster all chip in saying this is how you do it without actually providing you code and you learn to do it better and better as you gain experience.In my opinion you should start at understanding the IDE,and then tracing how a livelink call gets to builder chain.That is very interesting stuff.Plenty of solved and east to use oscript snippets are vailable in the oscript forum,builder forum.communities forum ,external places such as greggriffiths.com , livelink.in (my blog) , oscriptadventures.com and a whole lot of others.If you have a impending work that you would like to get done please don't hack a solution consider a! pproaching somebody for a solution or atleast ideas,your cus! tomer would be very happy that way :)BTW CSS IDE is changing I have not worked in it so don't know too much about it

[To post a comment, use the normal reply function]
Topic:	OScript tutorial and livelink builder
Forum:	Content Server Builder Forum
Content Server:	Knowledge Center

eLink User

Here’s the link to the BETA:https://knowledge.opentext.com/knowledge/cs.dll/Open/eclipse

From: eLink Entry: Content Server Builder Forum [mailto:componentbuilder@elinkkc.opentext.com]
Sent: Freitag, 16. November 2012 12:23
To: eLink Recipient
Subject: Re RE OScript tutorial and livelink builder 2

Re RE OScript tutorial and livelink builder 2

Posted bydavidt@opentext.com (Templeton, David) On 11-16-2012 12:22

RE OScript tutorial and livelink builder 2

Posted byappu.n.nair@conocophillips.com (Nair, Appu) On 11-16-2012 12:14

I do not want to instill fear for becoming a oscripter by self study.If you were going to self study you will need these things.In these days of VM technology it is almost a non brainer.

A pretty good representation of your production livelink same modules /patches etc.You probably don't need the complete EFS or search.
You need a database goes without saying because livelink will not run without it
The Builder program.

Pramod suggests at! tending classes.It is very good if you can do that but it does not need to be that way.There's nothing better if Howard Pell could teach you

In my opinion you should start at understanding the IDE,and then tracing how a livelink call gets to builder chain.That is very interesting stuff.

If you have a impending work that you would like to get done please don't hack a solution consider a! pproaching somebody for a solution or atleast ideas,your cus! tomer would be very happy that way

BTW CSS IDE is changing I have not worked in it so don't know too much about it

[To post a comment, use the normal reply function]
Topic:	OScript tutorial and livelink builder
Forum:	Content Server Builder Forum
Content Server:	Knowledge Center

[To post a comment, use the normal reply function]
Topic:	OScript tutorial and livelink builder
Forum:	Content Server Builder Forum
Content Server:	Knowledge Center